AK50 hydraulic motor

Reference CDOAK50

Product Details

Power
Fitting: 1"1/4
Speed

Silver Core Bit 450

Holes with a medium or big diameter can be ideally made with the Silver 450 Core Bit. This core bit is used on machines with a 1 ¼” fitting.

View

Construction Machinery

Caromax Id 700

Maxima

CAROMAXID700

Caromax ID 700 is the ideal hydraulic drilling machine for large diameter drilling.

View

Construction Machinery

Column 700

Maxima

COL700IN

Column 700 for positioned holes

View

Construction Machinery

Hydraulic Control Unit Diesel AS30

Maxima

CDOAS30

Hydraulic Control Unit Diesel AS30 - HP 10,5 - 30 Lt. min - 130 Bar

View

Wet Diamond Core Bits

Laser 450 Core Bit

Maxima

The Laser 420 Core Bit has been designed to drill small diameter holes and is specific for machines with a ½ gas fitting, whether manual or on a column.

View

Wet Diamond Core Bits

Black Core Bit 450

Maxima

Holes with a medium or big diameter can be ideally made with the Silver 450 Core Bit. This core bit is used on machines with a 1 ¼” fitting.

View

16 other products in the same category:

Construction Machinery

Hydraulic Pipe for oil 5 mt.

Maxima

CDOTUBO

Hydraulic pipe for Caromax Id 100 and Caromax Id 700 - 10 mt.

View

Construction Machinery

Caromax 250

Maxima

CAROMAX250

made in EU – certificate CE This is the best-selling wet drilling machine as it combines ease of use with a powerful motor, suitable for most drilling work in the construction sector.

View

Construction Machinery

Column 200

Maxima

COL200IN

Column160 for positioned drillings

View

Construction Machinery

Column 300

Maxima

COL300IN

Column 300 for positioned holes

View

Construction Machinery

Caromax 400

Maxima

CAROMAX400

made in EU -certificate CE As the name says, Caromax 400 has a maximum diamond core bit capacity of 400 mm diameter.

View

Power generators

Genemax 3000 IS

Maxima

GENEMAX3000IS

certificate CE GENEMAX 3000 IS is the most compact generator in the Maxima range, ideal for supplying power to even the most sophisticated appliances and devices that are sensitive to voltage and frequency fluctuations.

View

Construction Machinery

Caromax 2000 ASP

Maxima

CAROMAX2000ASP

made in EU – certificate CE CAROMAX 2000 ASP is the most powerful dry core drilling machine in the Maxima range, ideal for drilling through holes in concrete, masonry and stone, ventilation openings, continuous drilling of through holes in plumbing and air conditioning systems, and all cases where working in sensitive areas where the use of water is not...

View

Power generators

Genemax 3500 IS

Maxima

GENEMAX3500IS

certificate CE GENEMAX 3500 IS, thanks to a system that controls the engine speed according to the actually used power and thus the absorption, it allows petrol savings of 30% compared to classic generators.

View

Construction Machinery

Caromax Id 700

Maxima

CAROMAXID700

Caromax ID 700 is the ideal hydraulic drilling machine for large diameter drilling.

View

Construction Machinery

Caromax 500

Maxima

CAROMAX500

made in EU – certificate CE It is the ideal drilling system when large diameter holes need to be made hence the use of machinery with high nominal powers.

View

Construction Machinery

Hydraulic Control Unit Diesel AS30

Maxima

CDOAS30

Hydraulic Control Unit Diesel AS30 - HP 10,5 - 30 Lt. min - 130 Bar

View

Construction Machinery

Column 700

Maxima

COL700IN

Column 700 for positioned holes

View

Construction Machinery

CWEK26

Maxima

CWEK26

CWEK26 motor 2600 W

View

Accessory Equipment

Vacumax

Maxima

VACUMAX

Vacumax is a vacuum device for fixing coring machines fitted with a base with vacuum seals, such as the Caromax 200 and 250.

View

Accessory Equipment

Telescopic Column 250 Deluxe

Maxima

COL250X2MD

The Telescopic Column 250 Deluxe was designed to host the Caromax 200 and Caromax 250 thus making horizontal holes when it is not possible to drill the wall for anchor bolt or suction cup fixing one of the two coring machines.

View

Construction Machinery

Column 400

Maxima

COL400IN

Column 400 slantable for positioned holes

View