This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Sign Up or Log in to see the prices and buy the products.
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres. As it is not possible to extract the debris core, unlike with conventional drilling, with this system the hole can be made by progressively screwing on extensions one after the other, keeping the debris core inside the bits until drilling is finished. On request this system is also supplied with debris core extractors and stabilisers to keep the crown on track while drilling. As this drilling is of a high technical level we suggest contacting a Maxima technician beforehand for advice – he will explain and give technical tips to ensure an excellent result. In cases of unusual applications the technician will also be available for on-site surveys. The tool is available in three different versions: Impregnated, Set and Polycrystalline Crown and all three can be ordered for wet or compressed air use.
| TECHNICAL TABLE | |
| IMPREGNATED CROWNS Suitable for drilling: Granite – Porphyries – Stone – Concrete Reinforced concrete – Highly reinforced concrete | |
| MODEL | MATERIAL |
| Mx1 | For soft materials |
| Mx3 | For medium materials, i.e. reinforced concrete |
| Mx4 | For medium hard materials, i.e. highly reinforced concrete |
| Mx5 | For hard materials, i.e. granite |
| SET CROWNS Suitable for drilling: Hollow bricks – Solid bricks – Not reinforced concrete – Marble – Clay – Sandstone – Calcareous mate | |
| POLYCRYSTALLINE CROWNS Suitable for drilling: Hollow bricks – Solid bricks – Tufo – Lime - Plaster | |
13 other products in the same category:
Products from the same manufacturer
Wet Diamond Core Bits
Check also
Viewed products
