Registrati o Entra per vedere i prezzi ed acquistare i prodotti.
Wet Diamond Core Bits
There are 14 products.The range of Wet Core Bits is available for various uses with 1/2 gas and 1/4 fittings, with laser welds or braze welds, from 6 to 700 mm diameters. Except for the Stoneware Gold Core Bit, the rest of the range is designed for column machinery.
Stoneware Gold Core Bit
Only for Caromax 800.This core bit works at a very high speed to wet drill stoneware, granite, marble and many other materials without risks of cracking or breaking even if used in the corners of tiles.
Laser 420 Core Bit
The Laser 420 Core Bit has been designed to drill small diameter holes and is specific for machines with a ½ gas fitting, whether manual or on a column.
Gold Core Bit 450
Ideal for making holes with a medium or large diameter, this core bit is mounted on machines with a 1 ¼” fitting.
Silver Core Bit 450
Holes with a medium or big diameter can be ideally made with the Silver 450 Core Bit. This core bit is used on machines with a 1 ¼” fitting.
Continuous Drilling Fitting 1" 1/4
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Fitting 1/2 GAS
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Extension 0,5 mt
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Extension 1 mt
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Extractor
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Extractor Carrier
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Stabiliser
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Set Crown
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Impregnated Crown
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Continuous Drilling Polycrystalline Crown
This line of diamond core bits finds its ideal use when holes need to be made with depths of more than 2 linear metres.
Wet Diamond Core Bits
Check also
